How to measure PD for glasses: pupillary distance explained for optical shops

PD, or pupillary distance, is the distance between the centres of the pupils in millimetres. It is one of the most important measurements on a pair of glasses: a wrong PD puts the optical centre of the lens in the wrong place, which can cause eye strain, headaches and remakes. This guide explains how to measure PD for glasses at the optical counter, what a normal PD for adults is, and when you need monocular PD and fitting height.
What is pupillary distance (PD)?
Pupillary distance is measured from the centre of one pupil to the centre of the other. On a prescription or job card you may see it written as PD, IPD (interpupillary distance) or as two numbers such as 31.5 / 32, which is a monocular PD for the right and left eye. In Hindi it is पुतलियों के बीच की दूरी.
| Term | Meaning | Used for |
|---|---|---|
| Distance PD (binocular) | Pupil to pupil, eyes looking far away | Distance glasses |
| Near PD | Pupil to pupil while reading; a few mm smaller | Reading glasses |
| Monocular PD | Each pupil to the centre of the nose bridge (R / L) | Progressives, bifocals, high powers |
| Fitting height | Pupil centre down to the bottom of the lens in the frame | Progressives and bifocals |
Normal PD for adults
In a large set of adult measurements, the average distance PD was about 63 mm, and most adults fell between about 54 and 74 mm. Children's PD is smaller and grows with age, so measure it again at every new pair. Treat these as a sense check, not a target: always use the customer's own measurement.
How to measure PD with a PD ruler
- Sit at the same eye level as the customer, about 40 cm apart, in good light.
- Close your right eye and ask the customer to look at your open left eye.
- Line up the ruler's zero with the centre of the customer's right pupil.
- Close your left eye and open your right. Ask the customer to look at your right eye.
- Read the mark at the centre of the customer's left pupil. That is the distance PD.
- Measure twice. If the readings differ by more than about 1 mm, measure again.
If the pupil centre is hard to see on dark eyes, measure from the outer edge of one iris to the inner edge of the other; the distance is the same.
Measuring with a pupillometer
A pupillometer gives a quick, repeatable reading of both distance PD and monocular PD. The customer looks into it with the instrument resting on the nose bridge, and you read each eye separately. For progressive lenses and higher powers, it is worth having one at the counter.
Monocular PD and fitting height for progressives
Many faces are not perfectly symmetrical: one eye can be 1 or 2 mm further from the nose than the other. A total PD of 64 mm might really be 31 mm right and 33 mm left. For progressive and bifocal lenses, measure monocular PD and the fitting height with the customer wearing the chosen, adjusted frame. Our progressive lens fitting guide covers the full steps.
Why a wrong PD causes problems
When the optical centre of a lens is not in front of the pupil, the lens acts like a weak prism. By Prentice's rule, the prism (in prism dioptres) equals the decentration in centimetres times the lens power. A lens of −4.00 D set 5 mm off gives 0.5 × 4 = 2 prism dioptres, enough to cause strain, double vision or headaches. The higher the power, the more an error matters.
How to measure PD at home
Customers often ask how to measure PD at home. Standing in front of a mirror and holding a millimetre ruler against the brow gives a rough distance PD for simple single-vision glasses. It is not accurate enough for progressives, bifocals or high powers, and it does not give monocular PD or fitting height, so the best answer is: come in and we will measure it for you.
Saving PD so the lab gets it right
Most PD mistakes happen after the measurement: it is written on a slip, copied by hand and misread at the lab. In Opticdigit, the right and left eye power, ADD, PD and PD height are saved with the customer and printed on the bill and the job card, so the lab and the fitter work from the same numbers, and the next pair is made the same way. Read more about prescription management, or how to read an eye prescription for SPH, CYL, AXIS and ADD.
Frequently asked questions
What is PD in glasses?
PD (pupillary distance) is the distance between the centres of the two pupils, in millimetres. It tells the lab where to put the optical centre of each lens so you look through the right part of it. It is also called IPD (interpupillary distance).
What is a normal PD for adults?
Most adults have a distance PD between about 54 and 74 mm, with an average of about 63 mm. Children have smaller PDs. A number outside this range is possible, but worth measuring again.
What is the difference between distance PD and near PD?
Distance PD is measured with the eyes looking far away and is used for distance glasses. When you read, the eyes turn inwards, so near PD is a few millimetres smaller, often about 3 mm. Reading glasses use near PD.
How do I measure PD for progressive lenses?
Progressive lenses need a monocular PD (each eye from the centre of the nose bridge) and a fitting height, measured with the customer wearing the chosen frame. A single total PD is not enough, because many faces are not perfectly symmetrical.
PD kya hota hai?
PD यानी pupillary distance: दोनों आँखों की पुतलियों के बीच की दूरी, मिलीमीटर में। लैब इसी से तय करती है कि चश्मे के लेंस का सेंटर कहाँ होगा। गलत PD से आँखों पर ज़ोर पड़ सकता है।
Can I measure PD at home?
You can get a rough number with a millimetre ruler and a mirror, but for anything other than simple single-vision glasses, have it measured at an optical shop with a PD ruler or pupillometer. Progressive and high-power lenses need an accurate monocular PD and fitting height.
Run your optical shop from one screen
Billing with eye power, stock, barcode labels, cashback and SMS or WhatsApp reminders. Available on every platform as native apps: Android mobile app, iPhone and iPad app, Windows and Mac desktop apps, plus a web app for any browser, in 10 Indian languages. Plans from ₹2,500 a year.
